Empty outdoor telecom cabinet shells built to buyer drawings, with doors, gasket lands, cable entries and cooling interfaces reviewed before fabrication.
MSTFAB, operated by Guangzhou Maisituo Sheet Metal Manufacturing Co., Ltd., manufactures floor-standing, wall-mounted, pole-mounted and multi-compartment outdoor telecom cabinet shells for overseas OEM buyers. The approved drawing defines the material, interfaces, protection target and inspection scope; the buyer completes equipment integration and final system certification.
Review the broader custom telecom enclosure manufacturing scope or check the telecom cabinet cooling interface guide before releasing fan, louver or heat-exchanger cutouts.
Select an outdoor telecom enclosure starting point, then send the dimensions, equipment layout, material, IP or NEMA target, thermal interface, cable-entry and quantity requirements. Every item below is a configurable empty mechanical shell manufactured to buyer drawings.
Full-height empty cabinet shells with gasketed doors, rack space, plinths, cable entries and protected ventilation.
For base stations, outdoor networks, fiber and communication infrastructure
Outdoor telecom rack bodies with empty 19-inch rail zones, protected ventilation and service-access doors.
For backhaul, aggregation, transmission and network equipment
Outdoor shell parts with gasket paths and controlled cable entries. The completed configuration needs agreed IP verification.
For exposed communication, power and edge installations
Drawing-based outdoor cabinet bodies with gasketed doors, louvers, plinths and removable mechanical panels.
For private-label telecom equipment and repeat OEM programs
Matched doors, panels, rack rails, mounting plates and gland plates supplied as a controlled mechanical set.
For integrators that require predictable equipment and cable interfaces
Corrosion-focused bodies and doors prepared for a Type 4X project; the final Type claim requires applicable evaluation.
For coastal, utility and harsh-environment communication installations
Corrosion-resistant stainless steel cabinet shells with sealed access, mounting structures and service panels.
For coastal, marine, water-treatment and aggressive environments
Compact aluminum or steel shells with cable glands, mounting brackets and controlled weatherproof interfaces.
For small sites, surveillance, wireless nodes and roadside systems
Louver, fan, filter and heat-exchanger interface panels manufactured to buyer-defined cooling layouts.
For passive, forced-air and sealed heat-exchanger systems
Laser-cut louver panels, vent plates, gland plates and connector cutouts for configurable outdoor cabinets.
For equipment-specific airflow, power, fiber and signal interfaces
Door frames, gasket channels, rain lips, hinge plates and sealing components on a clean white background.
For controlled water paths and repeatable compression sealing
Galvanized cabinet frames, welded bases, plinths and equipment rails manufactured to released drawings.
For rigid floor-standing outdoor enclosure structures
Eight manufacturing controls connect a released outdoor telecom enclosure drawing to a cabinet shell that closes, seals, aligns and repeats across orders.
Checks equipment zones, rain paths, seals, cable entries, thermal interfaces and service access.
Controls vent patterns, connector windows, cable plates, rack features and panel outlines.
Protects rain lips, return flanges, door overlap, roof caps and repeat mechanical fit.
Balances outdoor cabinet strength, distortion control, mounting planes and door movement.
Finish requirements are confirmed per order; qualified long-term partners may complete specified powder coating or other treatments.
Hinges, compression latches, handles, studs, gaskets and grounding points are position-controlled.
Door gaps, gasket compression, rack positions, gland plates and thermal interfaces are checked.
Outdoor shells, doors, finishes, mounting plates and accessory kits are protected for overseas handling.
Outdoor telecom cabinet material and finish must match exposure, corrosion risk, structural load, grounding strategy, thermal design and cosmetic requirement.
Reliable outdoor telecom enclosure fabrication begins with the mechanical interfaces the integrator must assemble later. Rain protection, gasket compression, equipment zones, cable access and thermal hardware openings should be released before the first cabinet is cut.
The enclosure remains an empty mechanical structure, but equipment zones, weather protection, thermal interfaces, cable entry and access change with each telecom application.
Full-height weatherproof cabinet shells with mounting zones, gasketed doors, cable entries and thermal interfaces.
Outdoor rack shells for switches, fiber distribution, routers and transmission equipment.
Compact outdoor enclosures with mounting brackets, gland interfaces and protected service access.
NEMA-style outdoor enclosure parts for rectifiers, distribution, backup power and auxiliary equipment.
Stainless steel enclosure shells for coastal, marine, water-treatment and high-corrosion installations.
Outdoor telecom enclosure fabrication converts a released mechanical design into an empty weather-resistant sheet metal cabinet structure for buyer-installed communication, network, power, fiber, thermal and wiring equipment.
MSTFAB controls the cabinet body, doors, panels, rack or mounting structures, cable-entry features, rain and gasket geometry, weldments, finish and specified mechanical hardware. The buyer controls active equipment, cooling components, wiring, software, testing and final system certification.
Outdoor telecom cabinet shells are finish- and seal-sensitive assemblies that can twist, dent or lose door alignment during long-distance transport. Buyer-defined inspection can cover squareness, gasket paths, rack positions, cable entries and thermal interfaces. Packaging then restrains doors and panels, protects the coating and keeps loose plates, fasteners and accessories labeled.
It is the manufacture of custom weather-resistant sheet metal cabinet bodies, doors, panels, mounting structures, cable and thermal interfaces, sealing details and mechanical hardware for buyer-installed communication equipment.
Yes. MSTFAB manufactures custom outdoor telecom enclosure shells from 2D drawings, DXF files, STEP files, samples or technical specifications, with DFM review before production.
Overall size, rack or mounting layout, door count, mounting style, equipment zones and thermal interfaces are drawing-based. Projects include floor-standing, wall-mounted, pole-mounted, power, fiber and edge-network cabinets.
Yes. Specified rack rails, mounting plates, hinges, compression latches, handles, studs, grounding points, brackets, partitions and gaskets can be installed when approved positions are defined.
Yes. MSTFAB can manufacture the drawing-defined rain hoods, gasket channels, protected openings, sloped surfaces, drain paths, plinths and corrosion-focused materials. Final assembled rating remains with the responsible OEM or certification body.
MSTFAB uses drawing review, controlled cutting and bending, welding fixtures, squareness checks, gasket-path and door-gap inspection, plus first-article approval before repeat production.
Send cabinet drawings, overall dimensions, equipment and rack layout, material, finish, quantity, IP or NEMA target, thermal interface, cable-entry notes, hardware scope and delivery destination.
Attach one file, up to 10 MB (STEP/STP, DXF/DWG, PDF, ZIP, or an image). Include material, quantity, and finish details for an accurate quote.
WeChat Contact
Scan to connect with MSTFAB for OEM sheet metal fabrication support.
[email protected]
WhatsApp Me Directly
Scan or click for sheet metal fabrication quotes and drawing review.
+86 173 2831 6456