Empty operator-station shells built around the HMI model, push-button layout, viewing angle and service-access drawing.
A control station cabinet must place displays, switches and emergency-stop openings where operators can use them, while maintaining panel stiffness, door and gasket alignment, cable access and service clearance. MSTFAB controls the empty sheet metal structure while the buyer retains responsibility for HMIs, push buttons, PLCs, terminals, electrical devices, wiring, programming and final system certification.
MSTFAB manufactures empty control station cabinet shells, operator consoles, pedestal stations, wall-mounted push-button boxes, stainless HMI housings, front panels, gland plates and revision-controlled mechanical kits for overseas OEM buyers. The buyer installs HMIs, switches, emergency stops, indicators, PLCs, terminals, wiring and programming after the empty metal enclosure is approved.
Select a control station starting point, then send the dimensions, operator panel angle, HMI and button cutouts, material, protection target, cable-entry and quantity requirements. Every item below is a configurable empty mechanical shell manufactured to buyer drawings.
Empty floor-standing operator cabinet with sloped HMI panel, push-button cutouts, service door and cable-entry space.
For production lines, machine tools and process operator stations
Empty pedestal shell with HMI window, removable front plates, button openings, gasketed door and no electronics.
For drawing approval, mechanical sourcing and private labeling
Product-only console families with different heights, panel angles, display windows and lower service compartments.
For OEM machinery, automation cells and testing equipment
Compact sloped console body with display, selector, indicator and push-button cutouts plus lower access opening.
For inspection benches, laboratory systems and local machine control
Tall empty console cabinet with upper display zone, angled operator panel and lower service compartment.
For production cells, control rooms and process equipment
Empty stainless console shell with HMI and button cutouts, removable panels and buyer-defined cable interfaces.
For food, beverage, pharmaceutical and washdown areas
Fabricated display housings, covers and interface panels with precision touchscreen and control openings.
For embedded operator panels, mobile equipment and compact HMIs
Single-button and multi-button wall-mounted boxes supplied as empty mechanical shells for OEM control stations.
For start-stop, jog, reset and local emergency control points
Empty sloped console shell with blank HMI and control openings, access doors and serviceable internal space.
For traffic, transport and infrastructure operator systems
Laser-cut display windows, round control openings, label zones and removable panels manufactured from released drawings.
For accurate operator-device fit and repeat panel interchangeability
Powder-coated bodies and panels with protected cutout edges, controlled color and corrosion-focused pretreatment.
For indoor industrial and equipment-branding requirements
Gasket channels, door overlap and protected openings built to drawings; verify the target on the assembled configuration.
For dusty, wet and exposed industrial environments
Eight manufacturing controls connect a released control station drawing to a cabinet shell whose operator panel, doors, cutouts and cable interfaces align and repeat across orders.
Checks HMI and switch cutouts, panel angle, operator reach, door swing, cable entry and service access.
Controls display windows, round button holes, label zones, glands, mounting holes and panel outlines.
Protects sloped panel angles, return flanges, door overlap, gasket lands and repeat mechanical fit.
Balances cabinet strength, distortion control, operator-panel geometry and door movement.
Finish requirements are confirmed per order; qualified long-term partners may complete specified powder coating or other treatments.
Hinges, latches, handles, studs, gaskets, grounding points and lifting hardware are position-controlled.
Panel angles, HMI and button cutouts, door gaps, gland plates and hardware interfaces are checked.
Control station shells, removable panels, finishes and accessory kits are restrained for overseas handling.
Control station material and finish must match operator environment, corrosion risk, grounding strategy, cleaning method and cosmetic requirements.
Reliable control station fabrication begins with the interfaces operators and integrators must use later. Display windows, button diameters, emergency-stop spacing, panel angle, label zones, door clearance and cable access should be released before the first shell is cut.
The cabinet remains an empty mechanical structure, but operator-panel angle, HMI and button cutouts, environmental protection, cable entry and service access change with each application.
Floor-standing console shells with sloped operator panels, display zones, service doors and cable interfaces.
Compact wall-mounted empty boxes with buyer-defined control openings and protected cable entry.
Desktop and bench console bodies with controlled display, switch, indicator and service interfaces.
Stainless control station shells with cleanable surfaces and corrosion-focused construction.
Operator console shells with blank HMI and button openings, access doors and serviceable internal space.
Control station cabinet enclosure shell fabrication converts a released mechanical design into an empty operator-interface structure for buyer-installed HMIs, push buttons, selector switches, emergency stops, indicators, PLCs, terminals and wiring.
MSTFAB fabricates the cabinet body, operator panel, doors, removable covers, display and button cutouts, cable-entry features, gasket geometry and weldments, installs specified mechanical hardware and coordinates the approved finish. The buyer controls electrical devices, wiring, programming, testing and final system certification.
Control station shells are finish- and alignment-sensitive assemblies that can dent, twist or lose operator-panel accuracy during long-distance transport. Inspection verifies panel angle, HMI and button cutouts, door gaps, gland plates and hardware interfaces, while packaging restrains doors and removable panels and protects finished surfaces.
It is the manufacture of custom empty operator cabinet bodies, sloped panels, doors, removable covers, HMI and push-button cutouts, cable interfaces, finish and mechanical hardware for buyer-installed control devices.
Yes. MSTFAB manufactures custom control station shells from 2D drawings, DXF files, STEP files, samples or technical specifications, with DFM review before production.
Overall size, operator-panel angle, door count, display and control cutouts, cable entry and mounting style are drawing-based. Projects include floor-standing consoles, pedestal stations, desktop housings, wall-mounted button boxes and stainless enclosures.
Yes. Rectangular display windows, round 22 mm or 30 mm button holes, selector and indicator openings, label zones and buyer-defined device patterns can be laser cut from released drawings.
Yes. MSTFAB can manufacture drawing-defined gasket channels, protected openings, rain edges, sloped surfaces, drain paths and corrosion-focused materials. Final assembled protection rating remains with the responsible OEM or certification body.
MSTFAB uses drawing review, controlled laser cutting and bending, welding fixtures, angle and datum checks, door-gap and cutout inspection, plus first-article approval before repeat production.
Send cabinet drawings, overall dimensions, operator-panel height and angle, HMI and control cutouts, material, finish, quantity, protection target, cable-entry notes, hardware scope and delivery destination.
Attach one file, up to 10 MB (STEP/STP, DXF/DWG, PDF, ZIP, or an image). Include material, quantity, and finish details for an accurate quote.
WeChat Contact
Scan to connect with MSTFAB for OEM sheet metal fabrication support.
[email protected]
WhatsApp Me Directly
Scan or click for sheet metal fabrication quotes and drawing review.
+86 173 2831 6456